All of us cannot but worry about the quality of water in the water supply system, which we drink and use for domestic needs. Cleanliness should be taken care of both at the main facilities where water is drawn and in water supply networks.
Not only water intake must be protected from pollution, the water supply protection zone along its entire length should fully perform its function. Let's try to figure out what the security zone is and what responsibility is provided for non-compliance with sanitary standards.
Three zones of the sanitary protection zone
For the purpose of environmental protection, a sanitary protection zone (ZSanO) is being created around all water supply facilities.
Sanitary-protective zoning involves the formation of 3 zones:
- strict regime - No. 1;
- restrictive - No. 2;
- observant - No. 3.
In strict mode, the water intake facilities and the place of water intake are protected directly from accidental or intentional harm. The second restriction belt is designed to protect the water source from microbial contamination, and the third observation belt is needed to control the level of chemical pollution.
Image Gallery
Photo from
Water intake security sign
Strict sanitary protection zone
The second zone - protection against microbial contamination
Third Sanitary Protection Zone
If the first belt can be outlined manually, using a small number of normative digits, then the second and third zones are determined as a result of complex hydrodynamic calculations by a difficult method.
It’s much more convenient to master a computer program.AmwellsIn the meantime, we will consider the general principles for constructing sanitary protection zones in several ways.
#1. For open source water supply
Suppose the water in the water supply comes from a river - this is an open (or surface) source. The first belt is determined by the location of the water intake facilities (head elements of the water supply system). We add to them 180-200 meters upstream and 90-100 m downstream.
The water intake and the adjacent water area are controlled by paramilitary guards, it is forbidden to find strangers here.
Having decided on the length, let's find out the width of the coastal strip that falls into the ZSanO. There can be 50 and 200 m with the capture of the opposite bank, which depends on the power of the river itself. Along a large and deep channel with an intense current, no more than 50 m of the coast is isolated on both sides. And if the river is small - in total up to 150 m and more. This includes the width of two coastal edges and the river itself.
The water intake structure consists of receiver windows, a suction chamber, a 1st lift pumping station, a service pavilion in which personnel are located, and a survey gallery
When taking water from a large lake, reservoir, when it is very far from the opposite shore, they measure 100 m in all directions. It looks like a circle with such a radius, and some part of it passes through the water. The water border of the zone is marked with buoys and beacons with backlight.
The second belt is the territory that immediately follows and adjoins the first belt. There are severe restrictions on it: plants and industrial production, farmland, construction, the arrangement of beaches and places of mass out-of-town recreation are prohibited.
To know where to place the boundary of the second belt upstream, it is necessary to study the ability of river water to self-purify.
On average, a river processes pollution that has got into it from 3 to 5 days. During this time, the river flow should not have time to bring polluted water to the point of intake, self-purification should occur earlier. If you translate into mileage, then including in the second belt 20-35 km of the channel for large and 35-60 km for small rivers above the intake is quite enough.
Image Gallery
Photo from
Signs for designating water protection zones
The most stringent security zone
Security sign near an open reservoir
Protection against riverbed pollution
And downstream the border will pass at a distance of 250-300 m from the water intake. Here it is required to exclude the reverse movement of water against the flow due to the wind.
The third belt - it includes cities, towns, villages that are supplied with water from this source, the territory needs constant monitoring, but there are no such restrictions as in the first and second.
# 2 For water supply from an underground source
In the variant with an underground source, a sanitary protection zone is also needed. For shallow water wells that reveal aquifers of sedimentary deposits, the strict regime zone is surrounded by a radius of 50 m, and for deep wells reaching aquifers in bedrock, this figure is half that of 25 m.
There can be no unnecessary structures, except for the primary pumping station, water tower, and a minimum of utility buildings.
Surface and drainage drains must be taken outside, and the territory itself should be landscaped, landscaped, fenced, while at the same time providing an unhindered access for special vehicles with service crews to eliminate possible sudden malfunctions, planned measures for maintenance and repair of equipment.
The well is closed by a decorative warm house, the adjacent territory of strict regime is fenced around the perimeter, landscaped and kept in perfect order
The second zone is determined so that pollution from outside it could not penetrate underground aquifers and reach water intake in a period of 100 to 400 days - a specific figure is calculated based on the laws of hydrodynamics, taking into account the characteristics of soils and climatic factors.
The third zone is a zone of active human activity. It is assumed that the movement of pollution from this territory towards the water intake will be slow and will take longer than the planned life of the well (25-50 years).
Sanitary protection zones are drawn on the maps, information about them is published, and the high security zone is marked with all sorts of warning signs and signs on the ground, surrounded by a solid fence, barbed wire mesh, etc.
Image Gallery
Photo from
Around the underground water source, regardless of the volume of pumping, a protection zone is arranged, because rocks are not considered reliable protection. The radius is determined by the type of soil and the depth of the aquifer
According to technical and sanitary requirements, the radius of the well protection zone on sand is 50 m, the area of the protection zone is 1 ha
A well buried in indigenous limestones is not so extensively guarded. Around such sources, some of which are gushing, there should be a security zone with a radius of 30 m, its area is 0.25 ha
Water Well Equipment
Wellhead tip
High production artesian well
Private Source Protection
# 3 For structures and water pipelines outside the water intake
Outside the territories related to the abstraction of water from sources, there are strict security zones around such waterworks:
- spare tanks, filter stations - 30 m;
- water towers - 10 m;
- pumping plants, chlorine and reagent warehouses, sedimentation tanks, etc. - 15 m.
Along the water conduits, sanitary lanes must be laid on the left and right. Their width varies from 10 to 50 m and depends on how high the groundwater rises, what is the diameter of the water pipes.
If the cross-section of the pipe does not exceed 1 m, a strip of 10 m wide is sufficient, for a pipe with a diameter of more than 1 m, the width of the strip doubles, and with high groundwater up to 50 m, regardless of the size of the pipe.
When a water conduit is laid in already built-up areas, the reduction of the area of protection zones is allowed, if the sanitary-epidemiological service does not mind.
The specificity of prohibitions within the framework of the ZSanO
The most stringent requirements are imposed on strict security zones (first belt). On their territories it is impossible to erect buildings and structures, dig trenches or otherwise dig into the ground, store any materials, apply fertilizers, litter, cut down green spaces, graze livestock, go fishing, equip boat moorings, swim.
Prohibition signs are attached next to the warning sign, indicating that absolutely nothing should be done in the sanitary protection zone
An extensive list of bans has been compiled for the second security zone. Construction and blasting, driving in piles and other actions creating vibration are prohibited. It is forbidden to discharge effluents, to develop the bowels of the earth, to cut forests, to place warehouses of toxic chemicals, fertilizers, fuels and lubricants, to plow virgin lands, to drain swamps.
It is not allowed to allocate places for cattle cemeteries, silo and dung pits, livestock and poultry complexes, etc. The use of the protected area for living, outdoor activities, sports events is excluded. It is forbidden to pull water conduits through the territory of landfills, filtration fields, near cemeteries.
Subtleties of laying sewage
Accidents on sewer networks are a frequent occurrence, and this is not only due to the natural deterioration of pipes and systems. Sewerage, like water supply, has a security zone, but it is not customary to label it with signs and signs. The presence of sewer pipes and their location must be judged by the wells closed with massive metal covers marked “K” or “GK”.
Before starting excavation work in the security sewer zone, it is necessary to study the plans and schemes of engineering communications, to receive relevant recommendations and expert advice.
Otherwise, it is easy to break the sewer pipe with one careless push of the excavator bucket, and who will then calculate the losses and material costs of the restoration? And if there is a water supply nearby, then the damage and negative consequences increase many times.
The letters "K" or "Civil Code" on the cover of the sewer hatch indicate sewers or city sewers, respectively, on the cover of the water well should be written "B"
The security zone of sewage networks is set in proportion to the pipe section:
- up to 0.6 m across - at least 5 meters in both directions;
- from 0.6 to 1.0 m or more - 10-25 meters each.
It is necessary to take into account the seismological characteristics of the terrain, climate and average monthly temperatures, humidity and freezing of the soil, especially the soil. The presence of adverse factors is a reason for increasing the security zone.
The distance to the sewer networks located underground from such objects is also regulated:
- from any foundations, the sewage system should be 3-5 meters away (for pressure head the distance is greater than for gravity);
- from supporting structures, fences, trestles, the indent is from 1.5 m to 3.0 m;
- from the railway track - 3.5-4.0 m;
- from the road curb on the roadway - 2.0 m and 1.5 m (standards for pressure and gravity sewage);
- from ditches and ditches - 1-1.5 m from the near edge;
- street lighting poles, racks of contact networks - 1-1.5 m;
- pylons of high voltage power lines - 2.5-3 m.
The numbers are reference, accurate engineering calculations allow you to get more reasonable data. If the intersection of water and sewer pipes cannot be avoided, the water supply should be placed above the sewer. When it is technically difficult to carry out, a casing is put on the sewer pipes.
The space between it and the working tube is densely compacted with soil. On loams and clays, the casing length is 10 meters, on the sands - 20 meters. Crossing communications for different purposes is better at right angles.
More details about the calculation of the slope of sewer pipes can be found in this our article.
With a large-scale breakthrough of the sewage system, it is necessary to turn off the supply of tap water, so that if you do not stop, then at least reduce the discharge of fecal water outside
When opening water and sewer pipes in connection with the repair, it is allowed to use the equipment in earthwork to a certain depth. The last meter of earth thickness above the pipe is removed carefully by hand without using a tool with shock and vibration.
It is strictly forbidden to touch the sanitary zones of water pipes during installation, but in the city the requirements are less stringent.
In urban conditions, with forced parallel arrangement of the main water and sewer pipes, it is supposed to withstand the following distances:
- 10 m for pipes up to 1.0 m across;
- 20 m with a pipe diameter of more than 1.0 m;
- 50 m - on wet soil with any pipe diameter.
For thinner household sewage pipes, the distance to other underground utilities is determined by their standards:
- to the water supply - from 1.5 to 5.0 m, depending on the material and the diameter of the pipes;
- to rain drainage systems - 0.4 m;
- to gas pipelines - from 1.0 to 5 m;
- to cables laid underground - 0.5 m;
- to the heating plant - 1.0 m.
The final word on how to ensure the safe coexistence of water supply and sewage systems remains with the specialists of the water utility enterprises. All controversial issues should be resolved during the design process and not emerge at the operational stage.
If you do not control household and industrial wastewater, landfills, the amount of chemical fertilizers and poisons in the fields, water supplies will become worthless
List of regulatory documents
The mandatory creation of a sanitary protection system with a breakdown into belts is provided for by the law “On the sanitary and epidemiological well-being of the population” (No. 52FZ, 03.30.99) According to this law, the development of the water supply system of the water supply system should be connected to the water supply project and drawn up as a separate project.
ZSano design is based on SanPiN with cipher 2.1.4.1110-02 . This normative document defines how to calculate sanitary protection zones, and describes the requirements for them from the standpoint of sanitation and epidemiology. Ignoring the rules and regulations prescribed in SanPiN 2.1.4.1110-02, fraught with a high probability of outbreaks of serious infectious diseases, mass poisoning, epidemics.
Abbreviated documents will also be useful. SNiP: 40-03-99 (new version 2.04.03-85), 2.07.01-89 *, 2.07.01-89 *, 2.05.06-85 *, 3.05.04-85 *, 2.04.02-84 (section 10 - Sanitary protection zones ) In building codes and codes with the indicated codes, you can find the necessary information on the design of water supply and sewer networks, on the development of settlements, on trunk pipelines.
The norm for the laying depth of the water supply system is at least 0.5 m from the upper level of the pipe, excluding freezing of soil in winter. To the left and to the right of the trench there is a land allotment for the sanitary security strip 10-20 m wide
Regulatory materials - the basis for the development of standards, taking into account the local characteristics of a particular region. The approval and adjustment of the norms for the ZSanO are carried out by city and rural administrative bodies.
Responsibility for non-compliance with safety regulations
Security zones are a kind of guarantee of the purity of water and its protection from pollution. Observe the rules in force in these zones, all business entities and individuals are required. The following sanctions are provided for violation:
- indemnification - the perpetrator must compensate for the damage caused by unauthorized construction, storage and warehousing of materials, the accumulation of garbage and waste closer than 5 m from the water supply;
- administrative measures, i.e.fines - for neglecting building codes, rules, for the construction of buildings and any other construction without a project approved in advance;
- criminal liability for the seizure of land in sanitary protection zones.
It is foolish, as an excuse, to say that you did not know about the location of the protection zones - this does not exempt from liability.
Before performing any construction, land and other work, you should contact the water utility and familiarize yourself with where security zones are located in your village and its environs, and what actions cannot be carried out in the chosen place. This is the only way to avoid unpleasant and unexpected consequences.
It is not always possible to catch those who throw garbage in the water protection zone at the crime scene, and it remains only to appeal to the conscience and consciousness of all citizens
Since the first zone of the ZSanO must be marked with warning signs, if they are absent, the responsibility for the order in the security zone lies with the operating organization, and there is no reason to make claims against those who accidentally invade the forbidden territory.
But if there are warnings, the violator will not be able to absolve himself of blame for illegally entering the sanitary zone and taking any actions there.
Land swindlers who arbitrarily seize plots in the sanitary protection zone for construction can only be fought by tightening penalties and moving from administrative responsibility to criminal responsibility
The legislation of the Russian Federation determines the degree of responsibility and punishment for those who violate sanitary standards and requirements. You can read about this in the Code of the Russian Federation “On Administrative Violations” (No. 195FZ, December 30, 2001) In particular, Article 8.13 deals with water bodies and their protection.
A fine of 500 to 1 thousand rubles can be fined for violations in the sanitary protection zones of water pipelines and water intakes for an ordinary person, and an official - for 1-2 thousand rubles. Penalties for legal entities range from 10 to 20 thousand rubles.
If the zone of sanitary protection of a reservoir, lake, river involved in water supply is damaged, then fines are higher - 1-2 thousand rubles, 3-4 thousand rubles and 30-40 thousand rubles, respectively. Compliance with the rules and regulations of the legislation of the Russian Federation is strictly checked.
What does the strict security sanitary zone look like:
How does the program for calculating the sanitary protection zones of underground water intakes work:
To summarize ... Security zones are an important condition in the creation of water supply systems. And they must fully fulfill their functional purpose if we want clean water to run from the water taps.
When the filtering stations on the water supply can not cope with the level of pollution, harmful chlorine is added to the water for disinfection. Isn’t it better to remember the environment and not upset the sanitary protection zones?
Want to ask a question about the topic of an article? Please leave your comments in the block below. Here you can express your opinion or tell interesting facts about the sanitary protection zones.