A properly designed room ventilation system is the key to a healthy microclimate. One of the priority conditions for natural air circulation is the presence of traction. To normalize the pressure, a ventilation deflector is often used - the device enhances the intake from the ventilation duct due to the wind pressure.
Despite the simplicity of design and affordable price, such a cap significantly increases traction. The only difficulty is choosing the best option among the variety of offers.
We will help you figure this out. The article provides a detailed overview of the devices and principles of operation of various deflectors, provides practical recommendations for the selection and installation of caps.
To make it easier for you to decide on a model and understand the order of installation of the air “driver”, we have prepared a thematic photo and video selection.
The main tasks of the “ventilation hood”
The effectiveness of a ventilation system with natural air induction is largely determined by atmospheric conditions. Air flows circulate due to the lifting force arising due to the temperature difference inside and outside the room.
The wind also “corrects” the ventilation operation - it can both accelerate and impede natural air exchange.
In the summer, when the temperature conditions at home and on the street equalize, the pressure drop and draft tend to zero - natural ventilation malfunctions. Air circulation is reduced, and in some cases traction tipping occurs.
Partially reduce the influence of weather factors, direct them to the benefit of the functioning of the ventilation system and increase the air speed allows the installation of a deflector. A module that resembles a cap is mounted at the top of the exhaust duct.
Image Gallery
Photo from
Deflectors are installed on the exhaust ventilation ducts of gravitational systems, the operation of which is based on physical phenomena
The special design of the device, which does not require power supply, significantly increases traction and the speed of exhaust air output
The turbulence created inside a simple structure not only enhances the drainage, but also prevents the reverse flow of air mass
Among the devices independent of the power supply there are options with a static working part and dynamic - rotating from the slightest blow of the wind. The second option is more effective than the first
To increase the outflow speed, thereby increasing air exchange, a static deflector can also. For example, H-shaped, three tubes of which intensively stimulate air movement
Weather models are among the models with increased efficiency. They practically do not stop, sensitively react to a breath hardly perceptible to a person.
In regions with normal wind load it makes no sense to use dynamically rotating deflectors. The usual static type is enough
You can make a simple cap on the ventilation pipe, which creates sufficient turbulence, with your own hands. As a basis for crafts, you can take a factory-made deflector
Roof turbine vents
Grigorovich deflector on wentshacht
Diffusers Tsagi for private houses and workshops
Dynamic version of the deflector device
Specific H-shaped design
Vane type of deflector
Deflector in regions with normal wind load
Production of vent duct deflectors
The deflector solves two main tasks:
- Protects the mine from clogging and bird entry.
- Minimizes the negative impact of precipitation on ventilation equipment.
- It activates and enhances traction, generating and redirecting wind flows - the efficiency of the ventilation system increases by 15-20%. The baffle reduces the likelihood of reverse thrust.
Umbrella design is used to increase traction in the chimney. In addition, the chimney deflector additionally acts as a spark arrester.
The ventilation hood loses efficiency when the wind blows from below - the air flow hits the visor and interferes with the operation of the hood. The solution to the problem is the installation of a deflector with two cones
The scheme of the device and the principle of operation of the deflector
To get an accurate idea of what a deflector is and how it works, we will analyze a typical circuit of its device.
The main parts of the ventilation nozzle:
- Diffuser - base in the form of a truncated cone. The lower part of the cylindrical flask is mounted on the top of the ventilation duct discharged through the roof. It is in the diffuser that the airflow slows down and the pressure rises.
- Umbrella - The upper protective cap attached to the diffuser by struts. The element prevents debris from entering the ventilation duct.
- Body - ring or shell. The visible part of the deflector connected to the diffuser by two or three brackets. The plane of the body cuts through the air flow and creates a region of reduced pressure inside the cylinder.
In some versions, a mesh is installed to detain small debris. The filter insert weakens the draft somewhat.
The design of the deflector with the inlet pipe: 1 - head, 2 - diffuser, 3 - ring, 4 - foot brackets, 5 - cap, 6 - conical shield, d - diameter
The action of the ventilation nozzle is based on the Bernoulli effect - the relationship between pressure and the flow rate of the air flow in the channel. During acceleration, provoked by the narrowing of the duct, the pressure in the system drops, forming a vacuum in the pipeline.
Principle of operation:
- The baffle catches the wind.
- Air masses rush into the diffuser, branch and provoke a decrease in pressure at the top of the ventilation duct.
- Exhausted air from the room rushes into the discharged void.
With the right choice and installation of the deflector at the end of the exhaust duct, the pressure difference increases, and accordingly, the air exchange rate increases.
Wind nozzle classification
Despite the same purpose, exhaust hoods differ from each other.
Determining the optimal model of the device, it is necessary to evaluate:
- material of manufacture;
- principle of operation;
- design features.
Production material. The production uses aluminum, stainless steel, galvanization, copper, plastic and ceramics.
The best solution from the point of view of the balance “cost / quality” are steel and aluminum products. Copper deflectors are rarely used due to the high cost.
Plastic models differ from their counterparts in lower price, a variety of colors and shapes. Polymer disadvantages: high temperature susceptibility and limited service life
The symbiosis of strength and decorativeness - combined metal caps covered with plastic.
Principle of operation. Based on the functional features, ventilation devices are divided into 4 groups.
Deflector Types:
- static nozzles;
- rotary deflectors;
- static installations with an ejection fan;
- models with a rotary housing.
The first group includes models of the traditional type. Static deflectors are characterized by simplicity of design and the possibility of self-assembly. Valves are mounted on exhaust shafts of apartment and industrial aeration ducts.
The second group (rotary deflectors) is equipped with a system of rotating blades. The complex mechanism consists of an active head and a static base.
Gusts of wind cause the paddle drum to rotate. During operation, a vacuum is created at the mouth of the shaft, which prevents the appearance of reverse thrust
Static exhaust baffle with an ejection fan - modern technology. A fixed hood is installed at the end of the ventilation duct; a low-pressure axial fan is mounted directly under it inside the shaft.
The device of the static-rotational model: 1 - static deflector, 2 - fan, 3 - pressure sensor, 4 - insulated bulb, 5 - noise-absorbing ventilation duct, 6 - drainage, 7 - false ceiling
Under normal environmental conditions, the system functions like a traditional static deflector. As the wind and thermal pressure decreases, the sensor is triggered - the axial fan is turned on and the draft is normalized.
An interesting development that deserves attention is an ejection-type deflector with a rotary body. A rotating cap is mounted above the shaft.
The model consists of horizontal and vertical pipes, which are interconnected by a swivel mechanism. At the top of the deflector there is a partition - a weather vane.
The horizontal pipe turns in the direction of the wind. Streams rush into the inner part and create a vacuum - the thrust at the mouth of the mine increases
Design Features. Models with the same principle of inducing natural ventilation have some differences in the device.
Deflectors are open or closed, square or round, with one hood or several conical umbrellas. The characteristics of the most popular and effective modifications are described below.
Browse Popular Models
In practice, the following types have proven themselves well: Grigorovich, Volper, TsAGI, double and H-shaped deflector, rotary weather vane of the “Sachet” or “Hood” type.
The choice of a “wind nozzle” is based on the efficiency, cost of the deflector and the climatic conditions of the area. Some models are available for self-assembly and installation.
View # 1 - Grigorovich's classic cap
The most common option used in ventilation and smoke exhaust systems. Because of its simplicity and accessibility, the Grigorovich deflector holds a leading position among analogues.
The device is represented by a pair of umbrellas connected in a single "plate".
The cap is installed on circular pipelines or mounted through an adapter plate on rectangular and square shafts.
Basic equipment: 1 - a diffuser in the form of a narrowed cone, 2 - a protective umbrella, 3 - a reverse hood. Fixing spacers combine nozzle elements
Thanks to the design, double ejection of air is carried out - in the direction of the expanded part of the diffuser and in the direction of the return hood.
The flow rate under the lower cone increases due to the narrowing of the channel section, as a result, the pressure difference increases.
Image Gallery
Photo from
Simple vent pipe deflector
Base size for mounting the deflector
Metal cap diameter
Distance between a collar and an umbrella
View # 2 - TsAGI universal nozzle
The ventilation hood, designed by the Aerohydrodynamic Institute, enhances traction due to wind pressure and pressure differences at different heights.
The nozzle is complemented by a cylindrical screen, inside of which a prototype of a traditional deflector is placed.
An external shell prevents the overturning of natural ventilation, even in large ducts. The permissible diameter of the exhaust shaft is 100-1250 mm. Designations in the figure: a - top view, b - side view, D - diameter, H - device height
Distinctive features:
- permissible bandage, rack, flange and nipple connection with the air duct, depending on the shape of the neck of the mine;
- the ability to transport air, chemically non-aggressive environment (steel models withstand temperatures up to +800 ° C);
- in winter, ice may form on the inner walls of the cylinder, which can block the passage section.
The deflector is susceptible to wind currents - in calm weather it creates traction resistance.
View # 3 - Astato Static Dynamic Cap
Stato-mechanical deflector - development of a French company Astato. The device enhances the exhaust draft of the natural ventilation system due to wind and fan.
The nozzle is mounted on houses of any number of floors, reconstructed and new buildings.
In passive mode, the vacuum level created by Astato is equal to the sum of the wind and gravity pressures. This value corresponds to the operation of a static deflector.
After turning on the electric motor, the aerodynamics of the ventilation duct remain, the degree of vacuum is the total value of the fan head and pressure.
Deflector Characteristics:
- Installation methods. Nipple connection for round ventilation ducts, through an adapter - for a group of ducts or shafts of rectangular cross section.
- Control modes. Manual control and automatic are permissible - by means of a pressure sensor, time switch.
- Production material - aluminum.
- The lineup. The Astato deflector is presented in six positions, with a nominal diameter of 16-50 cm.
Series Modifications DYN-Astato equipped with a two-speed fan, the cost of products - 1300-4000 cu depending on the dimensions of the deflector.
View # 4 - deflector series DS
The open-type static nozzle DS looks like an Astato deflector. But, unlike the French cap, the DS series models do not have moving parts. The cap has three conical shaped discs.
Umbrellas for this type of deflector are truncated and located opposite each other, forming a channel like a Venturi nozzle. The diameter of the central hole of the lower disk corresponds to the cross section of the pipe. Brackets hold the mesh
The highest speed of wind turbulence is observed in the truncated channel of the hood - above the ventilation pipe. The pressure difference inside the deflector and remotely from it causes an additional vacuum that increases traction.
Features of the DS series model:
- the deflector is compatible with forced means of inducing air exchange - fans;
- a wind speed of 5-10 m / s increases traction by 10-40 Pa - the data are relevant at a relative humidity of 50 °, air temperature +25 ° C and a deviation of the wind flow up to 30 ° from the horizontal plane.
Deflectors are available in 13 sizes. Designation of ventilation hoods: DS - ***where *** - inner diameter in mm. The minimum dimensions are model DS-100, the maximum - DS-900.
View # 5 - rotary turbine or turbo deflector
The dynamic deflector consists of a fixed base and a rotating turbine head.
The elements of the spherical cap are made of light, thin metal, which allows the drum with blades to be put into operation with a slight wind - from 0.5 m / s.
The head rotates in one direction of the wind vector. “Partial vacuum” is observed under the hood - the air at the top of the ventilation duct is rarefied, the probability of overturning ventilation is minimized (+)
Advantages of a turbo deflector:
- efficiency work 2-4 times higher than static models;
- room protection from overheating in the summer and lowering the cost of air conditioning in the heat;
- aesthetic appearance - the deflector head is made in the form of an elegant spherical cap;
- condensation prevention inside the roof by lowering the temperature in hot weather;
- profitability of work - The active deflector operates without electricity.
The turbo deflector draws excess heat, moisture, dust, vapors and harmful gases from the building and the roof space from the mine, thereby increasing the life of the structural elements of the house.
The disadvantage of an active deflector is zero productivity in calm weather.
Labeling of Aerotech products is presented as TV-160, etc. The digital index indicates the diameter of the cross section of the fixed base of the hood
Dynamic nozzles are available in a wide range. Demand is for the goods of companies: Aerotech (Russia), Turbovent (Ukraine), Rotowent (Poland) and Turbomax (Belarus).
Image Gallery
Photo from
Turbine deflectors are used mainly on the roofs and ventilation ducts of large-sized rooms, above gyms, production halls, shopping and public complexes
The turbine blades are located so that no matter which side the wind appears, the device will begin to rotate, creating a vacuum inside
The turbine deflector is attached to the pipe with a clamp, to the roof - with a mounting plate screwed to the crate through the roof
At the top, the turbo deflector blades are connected by a round plate, to which they are fixed with rivets. The plate prevents atmospheric water from entering the ventilation duct
In the center of the turbine system there is a rotation axis with a bearing, providing smooth rotation
Turbine-type deflectors are made of galvanized or stainless steel. In the first case, in preference, products with a polymer decorative protective coating
Turbine deflectors are supplied both ready to install and disassembled
A detailed instruction is attached to the set of parts intended for assembling a turbine deflector, according to which it is necessary to connect the elements of the system
Turbo deflectors on the roof of the shopping complex
The location of the turbine blades
Turbine mounting plate
Fixation of the blades at the top of the deflector
Turbine deflector rotation axis
Model Options
Parts for assembling a turbo deflector
Turbine Deflector Assembly Kit
View # 6 - rotary weather vane type "hood"
Swivel hood type "hood" or "net" - a semicircular rotating catcher of air flow, mounted on a rod.
Its curved visors are fastened to the bearing assembly. At the top of the hull is a weather vane, allowing the structure to follow the direction of the wind.
Device diagram: 1 - working case, 2 - baffles, 3 - pivot rod, 4 - bearings, 5 - sealed cup, 6 - mounting ring, 7 - weather vane
The principle of operation of the ventilation "hood":
- Under the pressure of the wind, the weather vane rotates, being located along the line of air flow.
- Jets of air pass through the space between the curved visors.
- Streams change the vector and rush up.
- In this zone, according to the postulates of aerodynamics, the speed of air movement increases, and the pressure drops - a deep vacuum is formed.
- The draft from the ventilation shaft increases, providing additional exhaust air extraction.
The weather vane-deflector is more difficult for self-production than static models. The nozzle is operational with a wind load of up to 0.8 kPa (not more than 800 kgf / sq.m).
View # 7 - H-type module
The H-shaped deflector is mainly installed at manufacturing enterprises. Its purpose is to increase traction in the ventilation and chimney.
The wind enters the module’s vertical jumpers and sucks the exhaust air through the horizontal channels of the deflector, thereby increasing traction in the pipeline
The design does not require the use of a visor, since the top of the duct is protected by a horizontal element.
The main advantage of the H-shaped hood is its performance in case of strong gusts of wind. For operation, the deflector is able to use the force of wind flows directed from the bottom up.
Nuances of mounting wind-driven hoods
When installing the deflector should be guided by the norms of SNiP.
The focus is on the height of the ventilation pipe and hood:
- from 500 mm above the roof parapet / ridge if the duct is 1.5 m or less from the top of the roof;
- flush with the ridge or higher, if the distance from the ventilation duct to the parapet is 1.5-3 m;
- not lower than the deviation line drawn at an angle of 10 ° from the ridge down, provided the distance of the pipe is more than 3 m.
On a flat roof, the deflector is installed at a height of 50 cm and above.
When placing the ventilation shaft near the chimney, the same height of the ducts must be observed. If these requirements are neglected, the stove smoke can enter the room
Additional installation nuances:
- installation in the field of aerodynamic shadow of neighboring buildings is unacceptable;
- the deflector is located in the free-blowing zone, optimally if the hood is the highest part of the roof.
The installation of a nozzle of circular cross section on a square duct is carried out through a transition pipe.
Requirements and methods for installing the deflector on the boiler chimney are described in this article.
Comparison of the characteristics of a rotary turbine and TsAGI model:
The principle of operation of the rotary vane-deflector:
Technology for installing a turbo deflector on a flat roof:
Such a simple device as a deflector can solve a common problem of natural ventilation - lack of exhaust draft.
In addition to increasing the efficiency of air circulation, the hood has a protective role, preventing the ventilation duct from clogging with debris.
Have experience in installing and operating a ventilation deflector? Or have questions about the topic? Please share your opinion and leave comments. The feedback box is located below.