Accumulative water heaters (boilers) are a widespread type of household electrical appliances that allow homeowners to create a hot water supply system regardless of whether they are connected to a central hot water supply.
A household electric storage boiler for heating water is used in the creation of engineering water supply systems in private houses and apartments. We will tell you how to choose the best model of equipment, tell you what you should pay attention to before buying. Let's get acquainted with the leading manufacturers in the segment.
General information about storage boilers
An electric drive is a hollow metal tank equipped with electric water heating elements (TENs) and additional devices that provide automation of the process of heating water and maintaining its temperature within user-specified limits.
The specificity of storage models is that they are constantly sources of warm (hot) water. It can be used immediately after opening the mixer tap, without waiting for the heating element to heat up, in contrast to another widespread class of water heaters - flow-through.
Drive output to operating parameters does not take a certain time. Flowing analogs require “overclocking” for heating, and there is also instability associated with voltage fluctuations in the electrical network and uneven water pressure
Convenience and stability of water temperature are not the only advantages of the models. They also serve as a reserve capacity in the event of a power outage. A detailed classification of electric water heaters will be presented by an article that we recommend that you familiarize yourself with.
Types and principle of operation of drives
There are two types of electric boilers:
- Recessed - included in the water supply system existing in the house;
- Bulk - autonomous containers not connected to the water supply system. The user pours the required amount of water on his own.
95% of modern storage water heaters belong to the first group. They allow you to fully automate the process of heating water and maintaining its volume in the tank without user intervention.
It is worth paying attention to bulk storage water heaters if there is no water supply system in the room in principle
The place of installation of autonomous models can be baths, outbuildings, private houses, the water supply of which is carried out from water wells or wells
The built-in water heater is located near the existing water supply system and is connected to it by hoses (pipes). Depending on the shape and capacity, they can have a floor or wall design, located vertically or horizontally, depending on the characteristics of the room.
The shape of the storage water heaters can be cylindrical or rectangular, which makes it possible to rationally fit them into the interior without losing the volume of the room
Some models provide for concealed installation in niches available in the bathroom, or under the sink.
After installation, connection of water and electrical communications, the water heater starts to work in automatic mode. It is enough to open the hot water tap to immediately start the flow of heated water for domestic use. The volume of its receipt depends solely on the capacity of the water heater.
After the tank is completely empty, the drive enters the mode of water collection and heating. Thus, its work is cyclical, and breaks in readiness for the next use depend on the capacity of the tank and the power of the water heating elements.
Reasons for buying and installing a water heater
Before you go to the store for a purchase, you should evaluate the need to install a storage water heater in the house.
This applies to residents of comfortable housing, which is inconvenient for the periodic shutdown of hot water in the summer:
- Firstly, it is necessary to calculate how long in total there is no hot water in the apartment. Usually, repair work and prevention of water supply networks lasts no more than 1 month a year. Thus, the time during which you will use the water heater is just over 8% of the time of water consumption per year.
- Secondly, it is necessary to estimate the cost of heating 1 liter of water and maintaining a given temperature in the storage tank. The principle of operation of the boiler is such that even in a state of rest, it constantly consumes electricity to keep it hot.
- Thirdly, you should evaluate the amount of water that you spend while using the water heater.
The current consumption rate of hot water without a meter per person is 4.745 m3 per month. Based on this, it is easy to calculate what maximum volume of water will be heated for a certain number of days off the hot water supply, taking into account the number of family members.
Comparing the data obtained, you can really assess the cost of 1 liter of hot water from a water heater and the payback period of the equipment itself
These data are provided so as not to create the illusion that uninterrupted consumption of hot water will cost you no more than utility bills.
Like any "emergency" tool, a home boiler is very expensive and non-energy efficient. Of course, we are talking only about those houses where there is a centralized hot water supply.
How to choose the right drive?
The main selection criterion is the volume of the water tank. The more users, the larger the water heater should be.
Ideally, all family members should be able to use the hot water heated in the tank without waiting for the next portion to heat up
No less important is the location. If it is a bathroom, then all heated water will be consumed for hygiene needs.
If it is planned to place the water heater in the kitchen, it is better to first estimate the amount of consumption. Sometimes the cost of a water heater can be comparable to the cost of a dishwasher, which itself heats the water and does not require additional equipment.
The most energy-efficient in this regard are the boiler models, which allow you to connect several water outlets in the bathroom and in the kitchen. Using the existing volume of hot water in this case is possible independently.
The next criterion for choosing an electric boiler is performance. It directly depends on energy consumption, that is, the power of the heating elements.
The more powerful the elements, the faster the heating of the water. Powerful volumetric storage boilers are justified only if they are the only source of hot water in the room.
For occasional use for a period of temporary shutdown of hot water supply, it is better to opt for cheaper and less powerful models
The pursuit of an expensive brand model is not always appropriate, since a short life does not affect the reliability of the equipment. Even an inexpensive Chinese boiler can last for many years without breakdowns if it is used only for a few days (weeks) during the year.
Consider the technical characteristics and features of the heating tanks, which are decisive when buying the unit as a constant source of hot water or reserve.
Material of the tank. Stainless steel is a durable material, not subject to corrosion. Used in models belonging to the highest price category. Enamelled or ceramic sheet steel is used in the vast majority of models in the middle and lower price categories.
The presence of a magnesium anode. The magnesium anode is located inside the water tank and serves to reduce the process of scale formation on the surface of the heating elements and the walls of the tank. In conditions of low quality tap water in most regions of Russia (the content in it, in addition to calcium salts and other impurities) is a very useful element,
The magnesium anode can significantly extend the life of the equipment and reduce the frequency of preventative maintenance. Refers to consumables requiring periodic replacement
You should pay attention to the presence of anodes in the shopping or service centers for the selected model.
Drain valve necessary for draining water during equipment downtime or for use in unheated rooms in which the temperature drops below 0 ° C. Otherwise, the tank or protective enamel surface may be damaged due to the expansion of frozen ice.
Availability of service hole. A conveniently located opening for cleaning the inside of the water tank is necessary to remove scale and solid deposits from the walls of the tank.
Water connection system. Most models are equipped with flexible hoses. In this case, there is always the possibility of their rupture and flooding of the room.
More expensive models have a connection system through metal-plastic or metal (plastic) pipes - a reliable guarantee against leaks when the pressure drop in the pipeline
Pressure relief valve It guarantees the safety of the appliance during pressure fluctuations in the pipeline, protects the tank from damage during the expansion of water during heating.
Location of heating elements. Submersible heating elements are located inside the water tank, so the period of their operation depends on the quality of the water. They require periodic cleaning and replacement due to corrosion. When calcium salts (scale) are deposited on them, the rate of heating the water in the tank is greatly reduced and energy consumption increases.
Automation system. With the same performance parameters, the cost of a storage boiler can significantly increase if it uses a large number of electronics:
- programmer;
- LCD display
- touch control;
- remote control.
For rarely used equipment, these additional amenities are not needed.
Tank inner cover. Most manufacturers of tanks with enamel (ceramic) coating advertise the use of multilayer enamels, attribute to them increased anti-corrosion properties or antibacterial activity. Some are even self-cleaning.
In any case, the inner surface of the tank needs periodic cleaning, regardless of how technologically advanced the coating is used.
Responsible Manufacturers Rating
The market for storage water heaters is saturated with products from well-known European manufacturers with many years of experience in producing complex electrical products, as well as models made in China or Russia.
According to reviews, the models of the following brands are recognized as the best storage electric water heaters:
- Siemens
- Bosch;
- AEG4;
- Haier;
- Ariston;
- Zanussi;
- Elektrolux;
- Gorenje.
Some models of Chinese and Russian production use components of well-known brands, removed from the main production, and technologies that developers have abandoned. This greatly affects the quality of equipment, its reliability and durability.
Due to their low cost, you can opt for economical models only if the storage boiler is not intended for everyday use
In addition, many products made in China are of little or no use for repairs due to the lack of components and service centers.
If we analyze customer reviews and the sales level of drives of famous brands, we can get the following rating.
1st place - Bosch
The most popular German brand of household appliances among Russian consumers, which has more than a century of history.
The range of storage water heaters includes several “lines”, differing in volume, location, tank material, power of heating elements and filling with electronics
This allows you to choose among the Bosch products the most suitable water heater option. Moreover, the price range may vary by an order, while maintaining the same quality and reliability.
2nd place - AEG
A brand that has no less long-standing production traditions. Products are characterized by the highest quality and an abundance of technological innovations that are not available to competitors.
AEG products are not so popular among compatriots, since most of their products belong to the highest price category. The main production facilities are located in European countries, so the notorious "yellow" assembly does not threaten them.
3rd place - Ariston
The most popular Italian brand among Russians, which has an extensive collection of storage boilers of a wide variety of technical characteristics.
A distinctive feature of Ariston is its sophisticated Italian design. Such boilers fit organically into any interior and do not spoil the overall picture of the room.
They have excellent value for money, suitable for repair. They have an extensive service network throughout the country.
4th place - Electrolux
A Swedish brand that has long been synonymous with reliability, quality and ergonomics.
Electrolux products have models in their arsenal that differ not only in volume, but also in many useful functions and the possibility of programming
The best choice for those who intend to use a storage boiler for everyday use with heavy loads. Models are characterized by restrained, somewhat “cold” design, emphasizing Scandinavian equanimity.
5th place - Gorenje
The once-very popular Yugoslav, now Slovenian brand. It is among the ten largest manufacturers of household electrical appliances in the EU. Production is located in 20 countries on four continents.
In the water heaters of this brand, the latest inventions are implemented. Product quality and reliability are not inferior to German brands. The cost of water heaters is above average, but this is offset by reliable trouble-free operation with increased daily loads.
With guidelines for choosing an electric groove for a shower and a similarly operating device for a tap, articles will be introduced, which we highly recommend reading.
In order for the equipment to live up to expectations as much as possible, it is necessary to take its choice seriously. Useful footage will help.
Video # 1. Details about the device and types of drives:
Video # 2. Tips from the professionals:
The purchase of a storage water heater is a great opportunity to provide the family with hot water even when the central hot water supply is turned off. However, before buying, you should make calculations in order to correctly determine the volume and power of the models. In case of difficulty, you can always ask for the help of sales consultants.
Want to talk about how you chose an electric boiler for installation in your house / apartment? Do you know the selection criteria that are worth sharing with site visitors? Please write comments in the block below, ask questions and post a photo on the topic of the article.