With constantly increasing housing and communal services tariffs eating up a significant part of the household budget, it is important to carefully control expenses. One of the most significant items of utility bills is rightly considered payment for hot / cold water supply.
To reduce the amount set in the receipt, metering devices will help. In this article, we will analyze how to save water by the meter in order to further reduce costs for the services of the management company, without abandoning the usual water procedures.
Also in the article we will give the recommendations of specialists on the use of devices to reduce water consumption, and consider the best ways that will help to economically consume water when performing various household chores.
Advantages of installing water meters
According to the Federal Law on Energy Saving No. 261-FZ of 11/23/09, all payments for resources, including water supply, should be carried out according to the testimony of metering devices. In new homes, installation of water meters is foreseen before the commissioning of buildings.
In the old housing stock, water charges are charged according to consumption standards, if the apartment owners themselves do not think about buying individual devices. Recommendations on choosing a suitable water meter are given here.
Installation of water meters is carried out by employees of the relevant services. Each device is supplied with a passport and a certificate of conformity, which is certified by a body with accreditation of Gosstandart
Experts strongly recommend that you think about installing water meters, because they have a number of undoubted advantages:
- A normalized payment is charged for each tenant registered at the address, even if he does not live in the apartment. And when the device is operating, the consumption of resources is determined by its indications, regardless of the number of people registered in the apartment.
- Actual water consumption, as a rule, is much lower than the indicator that is set at the upper limit of the norm.
It is worth adding that saving is important not only in terms of the family budget. Water is a non-renewable natural resource, the effective use of which contributes to the formation of a favorable ecological situation and environmental protection.
Thinking about buying a counter? In this case, we recommend that you read the rating of the best flow meters according to customers.
How to take readings?
For the convenience of calculating the consumed water, two devices are mounted on pipes for cold and hot water supply. One, painted blue, is responsible for cold water, and the second, red, takes into account the consumption of hot water.
For installation, counters are used that meet GOST R 50601 - 50193. The type of device must comply with the State Standards of the Russian Federation and entered into the State Register of Measuring Instruments.
The amount of water used can be seen on the instrument panel as a combination of eight digits. The initial reading of the new counter will be the combination "00000000".
Behind the transparent window of the dial you can see the readings of the device. The first five black numbers indicate cubic meters of spent water, and the three red ones record the costs in liters
As you operate the device, the value will change. If the number 00012345 is recorded in the window of the water meter at zero source data by the date of the transfer of information, it means that the residents spent 12 cubic meters of 345 liters of water per month.
In the case of installing a new device, the first five digits indicated in black are transmitted to the controlling organization, while the last value is rounded up or down.
In the future, to determine the values, you need to follow a simple algorithm:
- take readings from hot / cold water meters;
- calculate the difference between the values of the current and previous month, for which you need to subtract from the larger numbers - the smaller;
- multiply the obtained numbers by the value of tariffs applicable to hot and cold water.
Each month, the user needs to take readings from two water meters and transfer the data to the controlling organizations in person, by phone or via the Internet. However, it is recommended that you perform all the operations described above to ensure that the calculations are accurate.
A more detailed guide to taking and transmitting meter readings is discussed in the next article.
Is it possible to independently verify the correct operation of the device? To do this, it is worth conducting a small experiment.
Having previously fixed the value of the last three digits of the counter, you need to fill it with water three times and empty the 10-liter bucket. In total, the fluid flow rate will be 30 liters.
This indicator should be reflected on the dial of the device. If the numbers on the screen diverge from reality up or down, you need to call specialists.
The interval between inspections for devices for monitoring cold water should be at least 6 years, and for accounting for hot water, at least 4 years. The results are recorded in the device passport
Devices for reducing water consumption
To reduce water supply costs, it is not enough to know how to correctly read hot and cold water from the meters installed on the pipes. There are many subtleties due to which you can significantly reduce fluid intake without experiencing any particular inconvenience.
Option No. 1 - economical mixers
The attention of visitors to plumbing stores has always been attracted by innovative faucets with an unusual stylish design. Such designs of designers are not only very beautiful, but also functional. They can significantly reduce water costs.
The following categories of mixers are particularly economical:
- single lever;
- sensory;
- models with thermostat;
- devices with an aerator.
Two lever cranesare not economical enough, as hot / cold water mixes slowly in them. To establish the optimum liquid temperature in them, you have to rotate the valves for a minute, during which up to 8 liters of water gets into the sewer.
It is better to replace such equipment with single lever model. It will allow you to easily and quickly adjust the mode of operation, while reducing water loss.
Modern touch models of mixers are often additionally equipped with thermostats that allow you to set the exact temperature. This greatly facilitates the process of setting the desired temperature.
Touch Mixers suggest contactless fluid supply. To turn on the water, it is enough to bring hands to the tap or an object that is supposed to be washed. And the infrared sensor will immediately react.
If you take your hand away, the trickle instantly stops pouring. Such devices can reduce the amount of water consumed by almost 70%.
Convenient and economical sanitary ware - thermostatic cranes. They can be set to a temperature that remains unchanged regardless of the level of heating of the liquid in the system.
The built-in blocker does not allow fluid to leak, waiting until it reaches the desired temperature. Thanks to this, a single liter can save several liters of water.
Features of a thermostatic mixer and the rules for choosing such a crane, we examined in detail in our other article.
A practical model of a mixer equipped with an aerator will be appropriate both in the bathroom and in the kitchen. It not only looks spectacular, but also reduces water costs
Option No. 2 - nozzles for cranes
To achieve water savings, it is not necessary to make expensive faucet replacement. A practical option is to purchase nozzles aimed at reducing water consumption.
These items include:
- limiters;
- single-click switches;
- aerators;
- special showers.
Popular products include limiting nozzles to the tap. The devices, simple in their construction, directing the trickle strictly through the sealing ring and the sprocket, allow reducing the usual water consumption by 41-50%.
The water-saving limiter is easily installed on various categories of cranes. Depending on the models, they can be screwed onto the mixer, or screwed inward
The action of the elements is based on an increase in pressure when the valve is opened. Because of this, the ring stretches, closing the sprocket and narrowing the place of water flow. When the system closes, the pressure indicator decreases, and the place for the fluid flow opens again.
Single Click Switch water mounted on the mixer, because of which the latter begins to work on the principle of a washstand. For water to appear, just click on the protruding rod.
The fluid supply automatically stops after a certain time, which can be changed using a specially attached key. Due to reduced flow and a limited flow period, water consumption is halved.
The designs of some types of modern cranes include a special device - aeratorby which water is saturated with tiny air bubbles. Faucets of this type help to reduce water consumption to 5-8 liters per minute versus 13-15 liters with traditional taps, while the pressure in the system remains unchanged.
Aerators can be purchased not only with the crane, but also separately. There are many options for such products, varying in size, shape and functionality.
Such elements can be installed not only on mixers, but also on shower heads, mounting them between the spray element and the hose.
Aerator nozzles divide the water flow into many small ducts, the gaps between which are filled with air bubbles. As a result, the rate of water consumption is reduced by 20-70%
Special costs will also help reduce water costs. Shower Heads with small holes that attaches below a conventional device. Another option is to purchase a special water-saving watering can, when using which the water supply is reduced by almost half, to 6-9 liters per minute.
Such household appliances are slightly more expensive than traditional ones, but the cost of acquiring them quickly pays off due to lower payments in housing and communal services. Experts advise to equip all the plumbing available in the house with “smart” devices.
According to calculations, this will reduce water costs by 30-70%. In monetary terms, the amount saved will be 5-12 thousand rubles per year for a standard family of 4 people.
Ways to reduce household water consumption
For a careful attitude to water use, it is advisable to review some habits without giving up the rules of hygiene and comfort.
Method # 1 - save bath water
A traditional place, involving a large flow of water, is considered a bathroom. However, losses can be reduced by following simple recommendations. So, when brushing your teeth, it is enough to turn on the mixer only at the initial and final stages of the process. Shaving should be done in the same way.
To reduce water costs when washing hands, it is better to let water in a small stream, and bring brushes close to the tap
A shower instead of a bath will reduce water consumption by 5-7 times. The reduction in the time spent under a watering can also save, because in two minutes the soul is lost up to 30 liters of water.
Those who are not ready to give up the bath can cut costs by filling the bowl halfway. It is important to monitor the pouring water in order to prevent overflow.
Often when you turn on hot water for the first minutes, a cold stream flows from the tap. So that the liquid does not disappear in vain, it can be collected in a container and used for useful purposes, for example, wet cleaning.
Method # 2 - we erase without costs
To remove dirt from linen and clothes, it is better to use modern washing machines. Additional savings will come from the use of equipment equipped with special sensors that help determine the exact amount of water required to wash the laundry.
Machines with a front hatch save more water than their counterparts with vertical loading. It is advisable to use equipment of class AA or higher
It is better to turn on the household appliance when the tank is fully loaded. Models with a half load mode are considered a good option. In this case, you can wash several things using a minimal amount of water.
To reduce costs, it is better to give preference to machine wash with reduced water consumption. If it is impossible to do without processing products by hand, to reduce the cost of liquid, it is advisable to rinse the laundry in a basin or bath, and not under a powerful water stream from the tap.
Method # 3 - save in the bathroom
There are also tricks to reduce the cost of water in the bathroom. This is, first of all, the purchase of modern economical toilets with a double flush system.
For older models, you can use a simple device: put a two-liter bottle filled with water in the tank. In this way, you can significantly reduce water consumption, saving up to 20 liters of fluid daily.
On the lid of economical toilet models, a double button is provided, which allows you to spend a full tank of water, the volume of which is 6-8 liters, or be limited to half the norm of 3-4 liters
Some users throw various small garbage, food leftovers, cat litter into the sanitary ware container. This not only increases the risk of blockages, but also leads to an increase in water costs, since you have to use the drain more often.
Method # 4 - wash the dishes correctly
To reduce water consumption in the kitchen, first of all, you should consider purchasing a dishwasher. When using this technique for washing 9 sets of dishes, only 13-15 liters of water will be required.
It is important to turn on the dishwasher in full load mode with a fully filled chamber. For even greater savings, you can skip the initial rinse step.
Try to get used to washing vegetables and fruits not from the tap, but in a bowl filled with water or a sink. It is hardly advisable to defrost meat or other products under the tap, it is better to leave them in the refrigerator chamber in the evening
When washing dishes manually, it’s nice to use the European method. Dirty appliances fold into a sink plugged with cork, which are filled with water and detergent.
With a two-chamber sink, dirty dishes for primary processing can be placed in one bowl, and for rinsing in the second. It is advisable to give preference to organic detergents, since less liquid is needed to wash them off.
Method # 5 - check the condition of the plumbing
Excessive water consumption largely depends on the condition of plumbing fixtures. It is estimated that 24 liters of water can flow out through a dripping tap per day, which amounts to 720 liters per month. We wrote about the causes of the breakdown and self-repair of the mixer in this article.
A water meter can help in monitoring the health of devices. If the numbers on the screen change when the cranes are turned off, it is necessary to examine the risk zones and, possibly, call a specialist.
When traveling, especially long ones, it is better to turn off the taps on the pipes. This simple precaution will save you not only from unnecessary expenses, but also from major troubles
It is better to change outdated models of cranes, replacing them with at least single lever mixers with a ceramic crane-axle box. The most economical are modifications with a thermostat or sensor, which we examined in detail above.
Often due to old fittings, water leaks occur in the drain tank, which leads to additional costs.
In order to notice the problem in time, at the first suspicion, you need to add a little food coloring to the container and wait 10-15 minutes. When colored streams appear in the sink, plumbing assistance will be required.
Rules for the provision of services by management companies
It’s useful for users to know that according to the Rules № 307/23.05.2006 “On the procedure for the provision of public services to citizens”; No. 176-FZ / 06/29/15 “On Amendments to the Housing Code of the Russian Federation and Certain Legislative Acts of the Russian Federation” tenants have the right to demand compensation from the management company for services of inadequate quality.
You must pay your bills on time by your service providers. It is also advisable to monitor tariffs that may change periodically.
The acts indicate that hot water should have a temperature of 60-70 ° C. If this mode is not maintained, then for every degree below the norm, 0.1% of the current tariff is calculated. If the water runs with low pressure - about 25% of the established norm - the payment for each hour is also reduced by 0.1%.
The envisaged interruptions in the water supply amount to a total of not more than 8 hours per month or 4 hours continuously. Scheduled shutdown can last no more than two weeks, and in the event of an accident on the highway - no more than one day.
Upon receipt of rusty water or liquid with an unpleasant odor, residents have the right to file a complaint with the management company about the poor provision of utility services. In this case, it is possible to claim not only a refund of the funds paid, but also compensation for harm to health.
The video presented below details how to take readings of water meters:
There are many ways to save water. This video will focus on the most effective methods.
Everyone can reduce the cost of household water. Try to start by installing meters for monitoring hot / cold water, and you will be surprised at the results achieved..
Even greater savings can be achieved by replacing obsolete plumbing with modern appliances. It is also important to consciously consider water consumption - even small changes in habits will help to maintain a home budget.
How do you save water? Maybe they installed one of the devices we examined to reduce water consumption or are you using one of the proposed options for economical consumption?
Maybe you use your own way of saving or do not consider it necessary to reduce water consumption? Share your opinion with other visitors to our site in the comments section.